Skip to main content
foodservicenerd
Compartment Sink

Advance Tabco 6-2-48 — 2-Compartment Sink, 24"x21" bowls, 48"W x 24"D, 16-ga 304 stainless

Specs & image © Advance Tabco. Independent reference — verify on the spec sheet.
Dimensions
24" deep × 21" long × 8" high
Advance Tabco 6-2-48 — 2-Compartment Sink, 48"W x 24"D, 16-ga stainless steel

The Advance Tabco 6-2-48 is a 2-compartment commercial stainless steel sink measuring 48″×24″ overall, built from 16-gauge 304 stainless. Each bowl is 24″×21″ and 14″ deep. Two bays suit prep or a light wash-and-rinse. The 304 alloy resists corrosion in a constantly-wet warewashing area.

Buying considerations

Three compartments cover the wash-rinse-sanitize sequence; confirm whether your local health code requires a fourth bay, and add left and right drainboards for soiled and clean ware. Match bowl size and depth to your largest pans. Browse all compartment sinks →

Specifications

SpecDetail
Compartments2
Bowl width24"
Bowl front-to-back21"
Bowl depth14"
Overall width48"
Overall depth24"
Overall height41"
DrainboardsNone
Drainboard length—
Backsplash—
MaterialStainless steel
Stainless gradeType 304 stainless
Gauge16 gauge
LegsGalvanized
Faucet includedNo
Faucet centers8
Drain size1.5"
NSF listedNo
Warranty—

A dash (—) means the manufacturer has not published that specification.

Pulled from Advance Tabco · spec sheet (PDF) ↗

Health-department & code relevance

Warewashing sink — most jurisdictions require a 3-compartment sink for manual wash-rinse-sanitize (FDA 4-301.12), plus an separate hand sink. Requirements by state →

Shipping & handling

UPS / small parcel — light enough to ship ground (86.0 lb), no freight appointment or liftgate needed.

Ships byUPS / ground parcel
Product weightNot published
Shipping weight86.0 lb
Shipping dimensionsNot published

Related equipment

What to check when buying compartment sinks

Match compartment count and drainboards to your wash-rinse-sanitize and code needs.

Try the Water heater sizing calculator →
Published by Resultex Media Group LLC · Independent & vendor-neutral · Educational only, not legal or engineering advice · Last verified September 2026