The AmGood AMGSINKS1C-181812-NF is a 1-compartment commercial stainless steel sink measuring 24″×23.5″ overall, built from 18-gauge 304 stainless. Each bowl is 18″×18″ and 12″ deep. A single bowl works for prep or utility use. The 304 alloy resists corrosion in a constantly-wet warewashing area. It is NSF listed.
Buying considerations
Three compartments cover the wash-rinse-sanitize sequence; confirm whether your local health code requires a fourth bay, and add left and right drainboards for soiled and clean ware. Match bowl size and depth to your largest pans. Browse all compartment sinks →
Specifications
| Spec | Detail |
|---|---|
| Compartments | 1 |
| Bowl width | 18" |
| Bowl front-to-back | 18" |
| Bowl depth | 12" |
| Overall width | 24" |
| Overall depth | 23.5" |
| Overall height | — |
| Drainboards | None |
| Drainboard length | — |
| Backsplash | — |
| Material | Stainless steel |
| Stainless grade | Type 304 stainless |
| Gauge | 18 gauge |
| Legs | Galvanized |
| Faucet included | No |
| Faucet centers | — |
| Drain size | — |
| NSF listed | Yes |
| Warranty | — |
A dash (—) means the manufacturer has not published that specification.
Pulled from AmGood
Health-department & code relevance
Warewashing sink — most jurisdictions require a 3-compartment sink for manual wash-rinse-sanitize (FDA 4-301.12), plus an separate hand sink. Requirements by state →
Shipping & handling
Shipping weight, dimensions and carrier method aren't published for this model yet. Check the manufacturer's spec sheet or ask a dealer for the crate weight and whether it ships LTL freight or parcel before you compare landed cost.